HONGXIN WATERPROOF
Weifang Hongxin Waterproof Material Co., Ltd.
Home › Products › TPE Lap Joint Tape
TPE Lap Joint Tape
TPE lap joint tape that seals membrane laps and details by adhesive bonding or cement-mortar wet application — no hot-air welder, no flame and no special equipment needed, strong grip on concrete and membrane surfaces with excellent weathering resistance, ideal for TPE, TPO and polyethylene composite membrane systems in wet-applied and adhesive-bonded waterproofing.
KEY SPECIFICATIONS
Thickness
0.5mm / 1.0mm / Customizable
Width
12- 100cm, customizable
Roll Length
5m / 10m / Customizable
Temp. Resistance
-40°C - 110°C
→ PRODUCT DETAILS
Everything You Need to Know
Overview
Hongxin TPE Lap Joint Tape is a TPE-based sealing tape used at the lap joints and details of membrane waterproofing systems. Unlike membranes that require hot-air welding, this tape is installed by two simple methods:
Two installation methods:
1. Adhesive bonding
Apply the recommended adhesive to the substrate or lap area and press the tape firmly into place — or peel and stick where the tape carries its own adhesive layer with release liner.
2. Cement-mortar wet application
Embed the tape in freshly applied cement mortar over the lap area, the same wet-application method used for polyethylene composite membrane systems. The mortar grips the tape surface and locks it in place as it cures.
✅ Good adhesion to concrete, mortar and membrane surfaces
✅ Excellent weathering and water resistance
✅ Pressure-sensitive, self-conforming — adapts to minor surface irregularities
✅ Flexible across a wide service temperature range
✅ Designed for 5+ years service life under normal conditions
✅ OEM available — custom width, thickness, surface finish and roll length
Technical Specifications
Standard
GB/T 23457-2017 / EN 13707
Thickness
0.5mm / 1.0mm / Customizable
Width
12 - 100cm, customizable
Installation Method
Adhesive bonding / cement-mortar wet application
Tensile Strength
Longitudinal: ≥ 60 N/mm; Transverse: ≥ 20 N/mm
Break Extension Rate
Longitudinal: ≥ 40% ; Transverse: ≥ 800%
Low Temp Flexibility
-40°C
Heat Resistance
110°C
MOQ
1000 Rolls
Lead Time
10–20 days
OEM/ODM
Available
Applications
🏗 Membrane Roofing — Sealing laps and details of mortar wet-applied and adhesive-bonded membrane systems; ideal for roofing contractors and waterproofing subcontractors
🏚 Underground & Foundation — Sealing membrane overlaps, construction joints and foundation details in below-grade structures
🔧 Detailing & Terminations — Corners, pipe penetrations, T-joints and edge terminations in membrane systems
🚧 Composite Sheet Systems — Lap reinforcement of polyethylene polypropylene (PE-PP-PE) composite membrane wet-applied with cement mortar
🔄 Repair & Reinforcement — Sealing and reinforcing leaks and damaged details in existing membrane waterproofing
Typical applications in waterproofing systems:
• Sealing membrane overlaps and lap joints
• Reinforcing corners, T-joints and flashing details
• Sealing pipe penetrations, drains and roof accessories
• Edge terminations and perimeter sealing
• Patching and reinforcing damaged membrane areas
• Waterproofing details in wet-applied and adhesive-bonded membrane systems
Certifications
✅ CE — EN 13707 European standard
✅ ISO 9001 — Quality Management System
✅ ISO 14001 — Environmental Management
✅ ISO 45001 — Occupational Health & Safety
✅ CEC — China Green Label
FAQ
Q: What is TPE lap joint tape?
A: It is a TPE-based sealing tape used at the laps and details of membrane waterproofing systems, installed by adhesive bonding or cement-mortar wet application.
Q: Does it require hot-air welding?
A: No — the tape is designed for adhesive bonding or cement-mortar wet application. No hot-air welder, power supply, flame or specialist equipment is needed.
Q: What are the two installation methods?
A: (1) Adhesive bonding — apply the recommended adhesive and press the tape in place; (2) cement-mortar wet application — embed the tape in freshly applied cement mortar, the same method used for polyethylene composite membrane systems.
Q: Which membranes is it compatible with?
A: Systems installed by wet-applied or adhesive-bonded methods, including polyethylene polypropylene (PE-PP-PE) composite membranes and TPE/TPO-based sheet systems; confirm the recommended system with our team.
Q: Can it be used on damp substrates?
A: Yes — the cement-mortar method is applied to damp or freshly screeded surfaces.
Q: What is the minimum order quantity?
A: MOQ is 1000 Rolls.
Q: Can you do OEM / private label?
A: Yes — custom thickness, width, surface and brand labeling.
Q: What is the lead time?
A: 10–20 days after order confirmation.
Q: Do you provide samples?
A: Yes, samples available before bulk order.
Q: What certifications do you have?
A: CE, ISO 9001/14001/45001, CEC Green Label.
→ YOU MAY ALSO NEED
Related Products
→ GET A QUOTE FOR THIS PRODUCT
Interested in TPE Lap Joint Tape?
Tell us your project specifications — our team will send a tailored quotation within 48 hours.
🟡 Custom thickness, width & surface available
🟡 OEM brand labeling supported
🟡 Full CE & ISO documentation included
🟡 Sample available before bulk order
HONGXIN WATERPROOF
Weifang Hongxin Waterproof Material Co., Ltd.
Founded 1998 · ISO & CE Certified · 30+ Countries
CONTACT
📍 Taitou Industrial Park, Shouguang City, Weifang City, Shandong Province, China
✉ support@hongxinwaterproof.com
📱 WhatsApp: +86 18366302449
🕐 Mon–Fri 08:30–18:00 CST